SLF Filter Cartridge

A full range of Stainless Steel Cartridge Vessel from Single piece to more than 100 rounds of cartridge installation from 5" to 70" length to meet your requirement.

Filter Cartridge

Pleated polypropylene filter cartridge is used in liquid of prefiltration,clarification filtration and terminal filtration.
It has the advantage of larger filtrated proportion and longer lifetime,which is good at deep-filtration.This products is not quaelric polluted and wide chemical consistence which is made by ultra sonic heat-fusing-caking technic
with the structure of polypropylene.The accurate range of filtration is from 0.1um to 30um.Their connective-port is 222,226 or flat crushing

SPLP PP Pleated Cartridge

  • Material-Polypropylenege
  • PTFE Membrane Pleated Cartridge
  • UPVDF- Full PVDF membrane Pleated Cartridge
  • 100% integrity test
  • Flashed with 18 mega ohm DI water
  • Large surface area for high flow rate and dirt holding capacity
  • 100% PP construction, end cap with thermal bonding(DOE, SOE (222-FIN, 222-Flat, 226-FIN, 226-Flat;Length: 5”/10”/20”/30”/40”/ 50”/60”/70”)
  • All materials are FDA listed for F&B application
  • We have DOE, SOE (222-FIN, 222-Flat, 226-FIN, 226-Flat configuration
  • Precision:0.1, 0.2, 0.5, 0.8, 1, 2, 3, 4, 5, 10, 20, 30, 40, 50 micron

SLFM Melt Blown Cartridge

  • Pure PP material
  • High Efficiencies/Flow rates
  • Depth filtration capability
  • The efficiency of maximal granule filtration is 99%.
  • The primary efficiency of accurate filtration is 95%
  • Stable pressure drop and lifespan
  • 5”, 9.75”, 10”, 19.5”, 20”, 29.25”, 30”, 39”, 40” and other special size on request.

Nominal precision (µm)

First precision (µm)

Max particle (µm)

Water flow(L/min)

0.5

1-5

5

8

1

5-15

10

15

3

15-20

20

20

5

20-30

25

25

10

30-40

35

30

20

35-50

45

40

30

40-60

50

45

50

50-70

65

50

SLFW Spun Wound Cartridge

•  Being made of fine yarn with advanced spinning technology,wound by most advanced wound technic.
•  Long lifespan、high precision、little bubble、without fiber off
•  High precision,large flow rate,little pressure different,high contain dirty,no odor, innocuity, repollution
•  High contain chemical

•  International standard outline dimension, replace products imported

length

material

ID(mm)

OD(mm)

Precision( ㎛ )

Element connection

Temperature (℃)

Max pressure(Mpa)

Flow (L/min)

10"(254mm)

PP PE
cotton
fiberglass
Nylon

φ 30

φ 63.5

1~100 ㎛

Plane type

80 ℃ to1 80 ℃

0.2

12

20"(508mm)

24

30"(762mm)

36

40"(1016mm)

48

Remarks:1、The flux from water in above form
2、Pressure difference:0.15kgf/cm 2 , element size 10"
3、Filtration precision: 96%
4、Flow rate of pledget element less 0.6 than that of the form
5、Flow rate of fiberglass element is less 0.6 than that of form

SLF Metal cartridge

• Single filter element is of large filter erea,high contain impurity,99% filter efficiency
•  Material: fiberfelt

•  Scientific design constructure space between,many sorts of mess layers,framework  multiplicity,reasonable match as per different precision pleat and quantity

Length

Material

ID(mm)

OD(mm)

Pricision( ㎛ )

Tem(℃)

Max pressure(Mpa)

Flow rate(L/min)

10"(254mm)

SS304 (L)、SS316(L)、321、etc

φ 30

φ 65

3 ㎛ ~ 250 ㎛

≤ 500

10 Mpa

18

20"(508mm)

36

30"(762mm)

54

40"(1016mm)

72

 

You may download detail of our brochure by click here

Contact us at : sales@luckrisfilter.com